Glass and multi-purpose cleaner Sprint Glass System Quattroselect 2,5L

Details

Description High concentration detergent for cleaning glass, mirrors and other shiny surfaces without leaving marks. Its safe formulation allows the product to be used on all water-resistant hard surfaces. The product is always and automatically diluted precisely using the Quattro Select dispenser, guaranteeing safety and total cost control.

Properties
- pH-neutral
- Quick drying due to high level of solvents
- Special blend of detergents
- Fresh scent
- Versatile application with the Quattro Select dispenser
- Uses unique, environmentally friendly pouch technology
- Quattro Select is a closed dispenser that prevents access to the concentrated product

Technical data
Appearance: Light blue, clear liquid
Relative density [20°C]: 0.97
pH-: 7.0-7.5
pH- in use: 7.5 +/- 0.5 at 3.5% dilution
The above data is typical of normal production and should not be taken as a specification.

Safe storage and handling
Safe handling:
Wash and dry hands after use. In case of prolonged contact, skin protection may be necessary.
A complete guide to handling and disposal of the product is provided separately in the Safety Data Sheet.
Storage information:
Store unopened in original packaging away from extreme temperatures.

Advantages

- Convient pour une utilisation sur diverses surfaces dures résistantes à l'eau, par exemple les fenêtres, les miroirs, les céramiques brillantes ainsi que les surfaces en plastique
. - Ne laisse pas de traces sur le verre et les surfaces
. - Excellente élimination des empreintes digitales et traitement des taches et autres salissures légèrement adhérentes
. - Laisse une odeur agréable
- Quattro Select se dose à la fois à haut et à bas débit, ce qui permet de l'utiliser à la fois avec des systèmes de vadrouille humide et des pulvérisateurs
. - Les sacs très légers de Quattro Select confèrent à l'emballage un excellent profil environnemental
. - Sécurité maximale pour les employés et les clients

Instructions for use

Dosage:
The product can only be used with the Quattro Select dosing device to control dilution. Use by spray method: 5% /1:20
Use with bucket and/or self-washer: 0.5% (1:200)
Please refer to the Quattro Select Dosing System Installation Manual for instructions on selecting the correct dilution
.
Application:
Point the yellow valve on the Quattro Select selector to the quadrant corresponding to the correct product and application.
Application by spraying: fill the sprayer with the low-flow eductor. Lightly spray a soft, lint-free cloth and wipe the surface dry. For stains, spray directly onto the surface and wipe dry.
Bucket: fill the bucket using the high-flow eductor through the filling gun. Apply the solution, leave to act and remove the dirty solution if necessary.

Important:
Before applying, test the compatibility of the material in a small, inconspicuous place.